EcoTouch 5029 Ai Inverter | Geothermal heat pump
+- Heat pump for higher power requirements
- Colored 4.3 inch touch display
- Integrated web interface for app control
- Intuitively operable control software EasyCon
- Central power switch
- Sensor system with numerous sensors
- COP counter and display of all operating data
- DHW heating, external storage on site
- Integrated electric heater 6 kW
- Chlorine-free refrigerant R410A without ozone damage
- Variable speed circulation pumps (efficiency class A)
- Integrated vibration damper Silenter®
- Service-friendly device design
- Rear mounting of the connections
- Device dimensions (W x H x D): 600 x 1470 x 633 mm
- Connection set
- Controller extension for:
- Second heating circuit e.g. for swimming pool heating
- Thermal solar energy use
- 2 additional mixer circuits
- Low operating costs due to COP values up to 5.6
- Efficient use of power reserves
- Touch display with innovative EasyCon software
- Smartphone control via EasyCon Mobile
- Fully integrated into the Internet
- Display of current COP value
- Housing in high-gloss white or stainless steel look
- Optimized footprint of 0.38 m²
High performance with minimum noise emission
The EcoTouch 5029 Ai series covers a power range of 2 - 14 kW as a version with inverter-controlled compressor. At COP values of up to 5.6, the compact heat pump is as quiet as a refrigerator.
Flexible thanks to inverter technology
With the ET 5029 Ai Inverter model variant, services can be called up as required. The infinitely variable power adjustment achieves the best efficiency values and optimised power consumption in any operating situation.
Space-saving compact central heating system
By connecting a water tank from the EcoStock series, the EcoTouch 5029 Ai Inverter becomes a complete heating system. The footprint of less than 0.38 m2 is ideal for space-saving installation.
Comfortable cooling function
In the cooling function, the low temperature level of the soil is transferred to the heating system. In this way, the rooms in the building remain pleasantly cool even at high outside temperatures.
Gallery
Awards
In addition to best performance values and high-quality equipment, many of our heat pumps have already received a number of awards due to their design and efficiency. The successful design and optimised housing dimensions allows seamless integration of our products into every living ambience. Furthermore, all models have excellent COP values. This is our self-concept of uncompromising high-end.
Pour performance
The pour performance is given in the unity litre per hour. She defines the amount of the hot water which can deliver a heat pump, until the heat stock isn´t big enough anymore. The necessary pour performance depends on the fact how many and which hot-water consumers take at the same time warm water.
Refrigeration circuit
The circuit inside the heat pump has the same structure as a household refrigerator. The evaporator withdraws renewable heat from the ground or the air. During this process the initially liquid refrigerant evaporates completely at low pressure. This refrigerant vapour is pulled in by a compressor and compressed at high pressure. In doing so, the condensation temperature of the refrigerant vapour shifts to a higher temperature. This vapour condenses in the condenser on the surface of the heat exchanger and in the process delivers the entire renewable energy as well as the electrical energy for the compressor to the heating water. Then the liquid refrigerant is returned again to the low pressure by means of the expansion valve..
COP value
The COP value of a heat pump stands for "Coefficient of Performance" and refers to the heat pump efficiency. The COP value indicates the ratio of heat output and the respective drive energy required, the power consumption measured in kW. The COP value is the basis for the Renewable Heat Incentive (RHI) subsidy. A good COP value is between 3 and 5. Heat pumps with a COP value below 2 are usually uneconomical.
Services
24-h service hotline
You can contact a telephone emergency service 24 hours a day and 7 days a week.
Software update service
The software for the heat pump and all other WATERKOTTE units is checked during our maintenance service on site and updated if necessary
Replacement machine service
Parts up to compressors can be replaced by the service engineer on site. In special cases a replacement machine up to max. 27 kW can be provided.
Spare parts service
You need a spare part? Our customer service will advise you on all components of your WATERKOTTE heat pump. This applies to both current and older series.
Disposal of old units
On the purchase and installation of a new WATERKOTTE heat pump your old system (boiler, heat pump) will be disposed of. This statement does not apply to oil tanks and contaminated units.
New systems Consultancy service
Prior to the purchase of a new system we support you with the design of the optimal system. For EcoVent systems we prepare for you detailed project documentationfor your living area ventilation.
Configuration service
The system settings are confi gured to suit the user‘s situation.
Initial commissioning service
New systems are checked for correct installation and placed in service by factory customer service.
Cleaning service
All components in a system are professionallycleaned and in this way kept in best condition in relation to effi ciency and hygiene.
Bore planning service
On the purchase of a geothermal system we provide advice on all aspects related to boring. We will also recommend a suitable boring company based on the information we have available.
Efficiency check service
The efficiency of your heat pump system is measured and optimised by fi ne tuning the settings for the individual units.
Further Products
EcoPack
Domestic water heater
Basic Line Air Bloc
Air water heat pump
EcoStock
Domestic water heater
